EN
EN
Polymer Materials
Shoe Substrate
Plastic Film
Plastic Materials
Biobased material
Synthetic Material
Special PPE
Polymer Materials
Shoe Substrate
Plastic Film
Plastic Materials
Biobased material
Synthetic Material
Special PPE
Polymer Materials
Shoe Substrate
Plastic Film
Plastic Materials
Biobased material
Synthetic Material
Special PPE
Applied to hot pressing integrated molding of materials such as EVA, rubber, fabric, PHYLON, EVA, etc.
RFE hardener can be added, or the material can be directly treated; By using appropriate treatment agents, the maximum effect can be achieved.
Drying quickly, saving work time, and improving production efficiency.
Can be manually brushed or sprayed with specialized equipment.
When the temperature of the environment where the glue is used is below 10 ° C and there is jelly phenomenon, it can be melted with warm water and continued to be used.
Apply liquid hot melt adhesive evenly on the surface of the material to be integrally formed; When the temperature of the glue is below 10 ° C, there is a jelly phenomenon. It can be melted with warm water and continued to be used;
It is best to use glass or ceramic containers to hold it; Apply this agent onto the surface of the material using a brush or glue machine;
After the material is glued, it must be completely dried, otherwise the glue will affect the tensile strength;
Oven drying: 60-65 ℃ x 4-5 minutes or natural drying: over 30 minutes.
Applied to hot pressing integrated molding of materials such as EVA, rubber, fabric, PHYLON, EVA, etc.
| BH-KT17 | Value |
| appearance | Colorless transparent viscous liquid |
| Effective ingredients | Resin/organic solvent |
| Solid component | 10.0-12.0% |
| Viscosity | ＜500CPS/25° |
| Storage temperature | 8-40℃ |
Address:
Room 201, No. 3 Third Road, Daluosha Entrepreneurship Park, Daojiao Town, Dongguan City, Guangdong Province
Email: bh@baihuanm.com
+86-13728295757
Official Website
